Product description
USE
Apply after you make sure the surface is clean and free of dust, loose particles and other pollutants. Then apply the primer POWERFLEX 300 PRIMER in order to strengthen the substrate. Following by coating with HYDROFLEX 500 by brush or roller. Apply two coats in cross direction after drying of the primer. The second layer is applied after drying the first layer. The first layer is diluted with 10% water and the second is diluted with 5% water. The surface is firm and compact for 24 - 48 hours depending on the temperature, humidity and thickness of the coating.
APPLICATION
This elastomeric retainer is applied to problem areas such as roofs, terraces, balconies, etc Ideal for difficult sealing points (angles, joints with adjacent walls, pergola bases).
The application of HYDROFLEX 500 shouldn't be at a temperature less than 8 ° C or higher than 35 ° C and not apply when provided rain or frost.

SPECIFICATIONS
Colors: White,
Hardness according to SHORE A: 50
Density: 1,40 ± 0,05 kg / lit
Viscosity: 50.000 ± 5000 cps
Elongation at break (ASTM D 412): 600%
Tightness: 7 atm in DIN 1048
Capillary water absorption: 0,01 kg / m2 • h 0,5 (EN 1062-3, requirement of EN 1504-2: w <0,1)
Reflectivity to sunlight: 90% (ASTM E903-96)
Minimum application temperature: + 5?C
Temperature resistance: from -15 ? C to + 90 ? C
STORAGE
12 months from date of production if stored at temperatures between + 5 ° C to + 35 ° C in original, sealed packaging.
Protect from direct sunlight and frost

VOC
According to Directive 2004/42 / EC (Annex II, table A), the maximum allowable VOC content for the product subcategory Θ, type Υ is 140 gr / lt (2010) for the ready to use product.

The finished (ready for use) product contains max 110 gr / lt WTO.